September 2nd, 2012, 04:34 AM
Kenmore Microwave--cracked outer plastic door
From just about 4 years of use our Kenmore microwave (Model#721.80039700) has developed a crack ON THE PLASTIC PORTION OF THE DOOR ONLY from the lower right hand corner of the glass down to the edge (see pic).
I've done a little research and it seems that as long as the door seal and glass are intact (they seem to be) it is still safe to use. I've ordered a tester to see if it's emitting anything and we are not using the oven until it's been tested.
is there a replacement part for this in case things aren't okay? I can't seem to find it on this site...
September 2nd, 2012, 08:07 AM
Panel,door Manufacturer Number MGC38915902
This is #1003 in the parts breakdown here.
September 2nd, 2012, 08:53 AM
Thanks Jeff. I was also thinking of just replacing the whole door assembly. It's double the price of the panel but supposedly a lot easier. What do you think?
September 2nd, 2012, 03:45 PM
By yheitman in forum Washers
Last Post: September 14th, 2016, 04:21 PM
By tmaher in forum Sears Kenmore
Last Post: May 3rd, 2011, 12:58 PM
By rbweav in forum Sears Kenmore
Last Post: May 30th, 2009, 10:38 AM
By FRANK RIZZO in forum Whirlpool/KitchenAid/Roper/Estate
Last Post: February 21st, 2008, 01:35 PM
By cobradvm1 in forum Washers
Last Post: April 19th, 2005, 08:04 PM
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!