Results 1 to 2 of 2

Thread: BOSCH NGMP055UC Cooktop- Not sparking

  1. #1
    Join Date
    May 2018

    Default BOSCH NGMP055UC Cooktop- Not sparking

    Model Number: NGMP055
    Brand: Bosch
    Age: 1-5 years

    I have a gas cooktop that does not spark.

    The cooktop is currently unhooked from the gas line. The LED lights come on when plugged into the 110v.
    So far I have replaced the wiring harness and the ignition box. I'm afraid that the wiring is incorrect and I am unable to get the unit to spark.

    Is there a wiring diagram anywhere? I've tried to search multiple avenues for a photo, video or screen shot of one of these units with the top off- no such luck.

    From left to right the wiring harness starts with blue, orange, purple, red and lastly yellow. Each valve has and "in and out" the colored wires are all going into the ports numbered "13" on the valves and the black connections are all going into the "11" ports. There is one valve in the middle that's different, due to the dual burner in the middle and this valve isn't labeled the same, nor is the same size, nor orientation as the smaller valves. I have the purple wire clipped to the left terminal thats in the middle of the valve switch and the black lead on the harness is clipped to the terminal on the end of the valve. The colored wire harness is all taped together and flows into a preset order on a plastic plug, this plug has been plugged into the blue ignitor box.

    Out of the back end of the ignitor I have the wires in the following order- (left to right) blue upper level, orange lower level, purple upper level, red lower level and yellow upper level.

    I currently have the top stainless cover off as well as the burner covers. I tested the unit by putting one burner cover on and trying to spark it. I did not set all five in place. There was no clicking, spark or anything of notice.

    On the main power cord I have the wires as black in the top terminal, white in the middle and the green ground as the lowest. I'm all out of ideas without any wiring diagrams! What am I missing?

    Thank you!
    Last edited by evacait; May 13th, 2018 at 10:13 PM.

  2. #2
    Join Date
    Aug 2004
    McMullen Valley, Arizona



    I'm all out of ideas without any wiring diagrams!
    That sums it up, without a wiring diagram we are all dead in the water.

    I did locate a wiring diagram for a slightly different model, but it looks close enough to your model that it may be the same.

    Here it is: Parts for Bosch NGM5064UC/01: Wiring Diagram Parts

    Let us know if that one works for your model.

    Appliance Repair School 1987-1988
    Star Appliance Tech. 2 yrs. 1988-1990
    Wards Appliance Tech. 11 yrs. 1990-2001
    Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
    Jake's Appliance Repair Nov. 2005-present

    Look-Up & Order Parts

Similar Threads

  1. Bosch Cooktop - How to replace the top
    By Tomkubo in forum Ranges/Ovens
    Replies: 1
    Last Post: September 29th, 2015, 08:35 AM
  2. How to access cooktop burners Bosch gas range
    By clicksys in forum Ranges/Ovens
    Replies: 8
    Last Post: October 29th, 2013, 11:30 PM
  3. Hot POint OTR Sparking !
    By appliancecenter in forum GE/Hotpoint
    Replies: 2
    Last Post: June 26th, 2008, 09:59 PM
  4. Bosch cooktop simmer
    By hated bosch cooktop in forum Bosch
    Replies: 1
    Last Post: October 19th, 2005, 03:55 PM
  5. Hated Bosch Cooktop
    By hated bosch cooktop in forum Ranges/Ovens
    Replies: 1
    Last Post: October 18th, 2005, 06:00 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!