Results 1 to 1 of 1

Thread: Bosch WAS24460 Error code F-61 flashes, double-beeps, where is metal rod door sensor seated?

  1. #1
    Join Date
    Jun 2018

    Default Bosch WAS24460 Error code F-61 flashes, double-beeps, where is metal rod door sensor seated?

    Model Number: WAS24460
    Brand: Bosch
    Age: 1-5 years

    I have a Bosch WAS24460-UC stackable front loader washing machine that will not start a cycle. Unit turns on but displays error code F-61 and then double beeps. I just replaced the door seal gasket. Afterward I cleaned out the pump drain (found a penny) from the lower right front of the unit. I double checked my all of reassembly; all done correctly, including seating all of the electrical connectors. The door latch assembly is definitely seated correctly; doubled checked the latch part. I am puzzled and cannot figure out on what is going on to cause this error. Unit worked fine for four years. Any ideas would be appreciated. What does error code F-61 mean for this model? Also , wonder if anyone has a repair manual for this unit?

    I think possibly the long metal rod (~ 16 inches) that travels from the inner door lock sensor down to the pump drain is out of place. Would anyone have a picture of what the drain area behind the thin clear plastic cover looks like? Where does the metal rod sit at the bottom? Does it sit above the pump drain area or hang down into it?
    Last edited by Jake; June 3rd, 2018 at 03:51 PM. Reason: No hotlinking allowed

Similar Threads

  1. Replies: 3
    Last Post: October 25th, 2017, 10:50 AM
  2. FIXED: Kenmore HE3 Dryer won't start, 3 beeps, shows error code 1E
    By bsdhaliwal in forum Sears Kenmore
    Replies: 37
    Last Post: September 29th, 2012, 02:20 PM
  3. Replies: 3
    Last Post: September 5th, 2012, 02:44 PM
  4. Frigidaire Washer Error code has 11 beeps and 3 flashes
    By veryoriginal in forum Frigidaire/Electrolux
    Replies: 1
    Last Post: July 6th, 2012, 11:43 AM
  5. range beeps constantly F1 error code displays
    By chrisalexander in forum Sears Kenmore
    Replies: 4
    Last Post: March 16th, 2012, 11:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!