• Please note, some of the links on our site are affiliate links (Learn More)

FIXED 665.75834001 Kenmore Range Error E0 -F2-

map_guy

Premium Member
Joined
Jan 5, 2023
Messages
5
Location
US
Model Number
665.75834001
Brand
Sears Kenmore
Age
More than 10 years
I have an old Kenmore Range Model 665.75834001 and after an hour or so of running the oven I will get the E0 -F2- error.

The gas range works fine for the most part, but every once in a while it will also trigger the E0 -F2- error.

I have checked the oven sensor with multi meter and it read 1.068 kOhm. I also bought a used board 8522865 I got off ebay and installed it, it worked at first, but once the oven was on for an hour for so the E0 -F2- error came back.

Is there anything else i can try, parts are hard to find because the stove is so old, but it still seems to work OK other than this error and i would hate to throw it away just for this.
 

Attachments

  • 2023_Kenmore_Error_Code.jpeg
    2023_Kenmore_Error_Code.jpeg
    147.9 KB · Views: 22

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
137,681
Location
Vicksburg Junction, Arizona
Hi, that F2 E0 means--->Key held down too long or shorted key.

1. Verify failure if not displayed, using CANCEL/OFF key. Press key for 5 seconds until last error code is displayed.
2. Disconnect power longer than 30 seconds.
3. Unlock keytail connector. Inspect connector locking tabs and keytail end for damage. Ensure locking tabs are not bent or broken and keytail is not creased or torn.
4. Reinsert keytail into connector. Ensure keytail is fully seated before locking down the connector. Once locked, tug keytail slightly to ensure lock.
5. Re-apply power and observe for longer than 1 minute.
6. If any false key presses occur or the failure remains, disconnect power, and replace keypad.
7. Repeat steps 3-6. If failure repeats, disconnect power and replace control.

Here's the keypad(aka membrane) for your model: Switch-Membrane 8272699

But its No Longer Available.
 

map_guy

Premium Member
Joined
Jan 5, 2023
Messages
5
Location
US
I can recheck the connection ribbon, but that has already reinstalled a few times. Thanks for the reply, there is one on ebay for a lot of money. I guess Ill just have to get another stove.
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
137,681
Location
Vicksburg Junction, Arizona
Yes, I agree.

Thanks for the update!
 

map_guy

Premium Member
Joined
Jan 5, 2023
Messages
5
Location
US
Just one last update.

The ebay seller who was selling replacement switch membrane dropped their price to $100, I decided to order it an ice it a shot. So far so good.

I had the oven for a few hours and no error messages. Ill probably still grab a stove, but at least I can look for a decent deal now.

Thanks again for the part number.
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
137,681
Location
Vicksburg Junction, Arizona
Glad to hear that.(y)

Thanks for the update!
 
If you feel that you have benefited from this site, and would like to show your appreciation.
Top