Results 1 to 2 of 2

Thread: Takagi T-D2-IN tankless keeps blowing fuse

  1. #1
    Join Date
    Apr 2008
    Location
    South Carolina
    Posts
    18

    Default Takagi T-D2-IN tankless keeps blowing fuse

    I had an electrical service call to a home after a tree limb knocked out the incoming wiring at the transformer. The net result was four fried arcfaults, one capacitor at the condensor, blown fuse at the air handler, and one blown fuse at the water heater. I replaced the left 5 amp fuse, and it immediately blows the new one. The guide under the cover references the surge "something or another" 9i'm home now and not in front of it), and it has the two fuses. Has anyone else run across this type of problem? I am wondering if this little board is fried. Any insight would be appreciated.

    C2500

  2. #2
    Join Date
    Jul 2006
    Location
    Murray, Utah 84107, United States
    Posts
    30,904

    Default

    We used to have a HVAC tech that answered questions on water heaters and central air but he disappeared on us. The techs here don't have a lot of time on HVAC systems or water tanks but we try. It sounds like we're dealing with a direct short somewhere so the first thing I need to do is see if I can locate a wiring diagram for that model. Stand by.
    OWNER RICK'S APPLIANCE REPAIR
    APPLIANCE TECHNICIAN FOR 31 YEARS
    REFRIGERATION SPECIALIST
    ONLINE SERV TECH: ApplianceBlog.com
    CERTIFIED TYPE 1; TYPE 2.....REFRIGERATION SERVICE E.S.

Similar Threads

  1. Blowing Bimetal Fuse
    By FJCIII in forum KitchenAid
    Replies: 4
    Last Post: June 23rd, 2015, 07:59 AM
  2. Fuse keeps blowing
    By bsaucer in forum Undercounter / Freestanding / Stand Alone Ice Makers
    Replies: 4
    Last Post: January 21st, 2015, 09:03 AM
  3. thermal cut-off fuse keeps blowing
    By theripster in forum Sears Kenmore
    Replies: 5
    Last Post: January 17th, 2012, 01:32 PM
  4. Thermal Fuse Keeps Blowing
    By calisteve in forum Whirlpool/KitchenAid/Roper/Estate
    Replies: 9
    Last Post: September 19th, 2011, 08:51 PM
  5. Therman Fuse Keeps BLowing
    By jvietri in forum KitchenAid
    Replies: 3
    Last Post: December 10th, 2005, 01:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!