Results 1 to 2 of 2

Thread: Kitchenaid KUDP02FRBT1 Wont run

  1. #1
    Join Date
    Oct 2015
    United States

    Default Kitchenaid KUDP02FRBT1 Wont run

    Model Number: KUDP02FRBT1
    Brand: KitchenAid
    Age: 6-10 years

    i cant get my dishwasher to run again i slammed door i tried to reset at the breaker no good then tried to reboot the lock no good i let sit then tried to start it start light comes on then starts flashing only is there anything else i can do before possibly buying a new control panel or a manual to repair it something was working fine till i slammed the door

    any help will be appreciated thank you

    serial number FT0301459

  2. #2
    Join Date
    Aug 2004
    McMullen Valley, Arizona


    Hi Ron,

    Are you sure your door latch and door switch are not broken after you slammed the door?

    Here's the door latch for your model:
    8193830 Latch-Door

    Here's the door switch for your model:
    WP8269209 Door Switch

    This video should help you ohm test that door switch: Dishwasher door switch ohm testing video

    Appliance Repair School 1987-1988
    Star Appliance Tech. 2 yrs. 1988-1990
    Wards Appliance Tech. 11 yrs. 1990-2001
    Sears Appliance Tech. 4 yrs. 2001-Oct. 2005
    Jake's Appliance Repair Nov. 2005-present

    Look-Up & Order Parts

Similar Threads

  1. FIXED: Kitchenaid KSSC48QTS02 compressor/fan sometimes wont run
    By jm_maclaren in forum KitchenAid
    Replies: 3
    Last Post: August 2nd, 2016, 01:22 AM
  2. KitchenAid Dishwasher wont work
    By wagsy in forum KitchenAid
    Replies: 16
    Last Post: December 2nd, 2011, 01:18 AM
  3. [FIXED] kitchenaid dryer wont run
    By LAK7965 in forum Whirlpool/KitchenAid/Roper/Estate
    Replies: 5
    Last Post: March 26th, 2011, 12:29 PM
  4. FIXED: KitchenAid wont stay cool
    By haeffnkr in forum KitchenAid
    Replies: 10
    Last Post: March 1st, 2007, 12:41 PM
  5. kitchenaid wont do anything
    By again in forum Whirlpool/KitchenAid/Roper/Estate
    Replies: 5
    Last Post: January 8th, 2006, 06:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!