Results 1 to 4 of 4

Thread: Kenmore Dishwasher "Complete" light blinks and no start... Help please!!

  1. #1
    Join Date
    Dec 2006
    Location
    DAUPHIN, MB
    Posts
    66

    Default Kenmore Dishwasher "Complete" light blinks and no start... Help please!!

    Model Number: 665.13922017
    Brand: Sears Kenmore
    Age: 6-10 years

    I have a Kenmore d-washer that the "COMPLETE" light will blink 4 times, pauses then blinks 4 more times. I shut the breaker off for 15 mins, turn on again and it does the same thing. I tried the heated dry/normal to start diagnostics and the complete light keeps blinking and none of the other buttons respond at all. Any help??

  2. #2
    Join Date
    Jul 2006
    Location
    Murray, Utah 84107, United States
    Posts
    32,570

    Default

    I couldn't get anything to come up with that model number. Probably because it's a Canadian model. Do this:

    A blinking LED over one of the keys of the keypad indicates one or more key switch lines are stuck or shorted on the control or the keypad. To determine if the control or keypad is faulty, do the following test:

    Unplug dishwasher or disconnect power

    Open the dishwasher door.

    Open console and disconnect the keypad ribbon connection from the control (at P1).

    Make sure all other connections are made.

    Put console back together.

    Do not close the dishwasher door.

    Plug in dishwasher or reconnect power.

    Wait 5 seconds.

    Close dishwasher door.

    Monitor the control’s response.

    ➔If the control is OK (no longer sees shorts with the keypad unplugged), it will respond by turning on the drain motor for 2 minutes. Check and/or replace the keypad if the control responds OK.

    ➔If the control is not OK (still sees shorts with the keypad unplugged), then the drain motor will NOT respond. If drain motor does not start within 10 seconds, repeat or verify that all steps were followed, and then replace the control.
    OWNER RICK'S APPLIANCE REPAIR
    APPLIANCE TECHNICIAN FOR 31 YEARS
    REFRIGERATION SPECIALIST
    ONLINE SERV TECH: ApplianceBlog.com
    CERTIFIED TYPE 1; TYPE 2.....REFRIGERATION SERVICE E.S.

  3. #3
    Join Date
    Dec 2006
    Location
    DAUPHIN, MB
    Posts
    66

    Default

    Thank you so much Rick! I will try this and let u know!

  4. #4
    Join Date
    Jul 2006
    Location
    Murray, Utah 84107, United States
    Posts
    32,570

    Default

    OK, sounds good.
    OWNER RICK'S APPLIANCE REPAIR
    APPLIANCE TECHNICIAN FOR 31 YEARS
    REFRIGERATION SPECIALIST
    ONLINE SERV TECH: ApplianceBlog.com
    CERTIFIED TYPE 1; TYPE 2.....REFRIGERATION SERVICE E.S.

Similar Threads

  1. FIXED: KUDT03FTWH1 "Start" light blinks, cycle won't start
    By truher in forum KitchenAid
    Replies: 15
    Last Post: April 16th, 2017, 10:23 AM
  2. 665.13923K015 "Complete" light blinking 4 times
    By Grahamap in forum Sears Kenmore
    Replies: 8
    Last Post: December 29th, 2014, 08:41 AM
  3. Replies: 5
    Last Post: November 3rd, 2011, 04:53 PM
  4. Replies: 1
    Last Post: March 18th, 2007, 08:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
If you feel that you have benefited from this site, and would like to show your appreciation, you can throw a buck or two in the Appliance Blog Tip Jar - Thank you!