• Please note, some of the links on our site are affiliate links (Learn More)

Bosch WTA 3500 UC 80/IV

Mr. G

Premium Member
Joined
Mar 17, 2007
Messages
13
Location
california
All Lights work. Function buttons seem to change functions. When I push start button "Drying" light comes on but nothing happens.
 

Mr. G

Premium Member
Joined
Mar 17, 2007
Messages
13
Location
california
Checked

There is a "NTC" temp sensor that is listed as R3 that reads open. The schematic says 18K. It looks like a sensor. It's in a plenum with what appears to be heaters and a Overheat Thermostat. I'm looking at schematic 5185418AA7.
 

Mr. G

Premium Member
Joined
Mar 17, 2007
Messages
13
Location
california
Double Check

I double checked NTC sensor. It checks good. I had the meter on the wrong scale. I think my problem may be the motor overload. Does anyone know the P/N I could not find it on the on line parts list. I am currious if it's easy to get to.

Thanks
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
118,957
Location
McMullen Valley, Arizona
Top