• Please note, some of the links on our site are affiliate links (Learn More)

CAE2795FQ1 Whirlpool washer control will not engage

tmol

Premium Member
Joined
Jan 21, 2011
Messages
309
Location
florida
Model Number
CAE2795FQ1
Brand
Whirlpool
Age
1-5 years
On this model, finding the control board not responding acts erratic . Replaced control board but still doing same thing.
inspect washer machine——found broken wire blue at drain pump pushed wires and drain pump runs. Repaired wire at drain pump.
but control will not engage. thinking model may have wiring harness problems. It’s about one year old. This one does not have a coin Box.
thanks. T-mol
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
134,144
Location
Redmond, Oregon
Hi tmol,

Yes, check for more broken or damaged wires first. Make sure the washer stays unplugged when checking for broken or damaged wires.:)

I'm attaching the tech. data sheet below, see if you can get into the ACTIVATING THE SERVICE DIAGNOSTIC TEST MODES

Then FAULT CODE DISPLAY MODE

Jake
 

Attachments

  • TechSheet-W10838047-RevB.pdf
    2.7 MB · Views: 29

tmol

Premium Member
Joined
Jan 21, 2011
Messages
309
Location
florida
Found another broken wire in harness. thanks for info. Going to keep looking. Will update
thanks t mol.
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
134,144
Location
Redmond, Oregon
Ok tmol, sounds like your making progress, yes keep us posted.:)

Jake
 
If you feel that you have benefited from this site, and would like to show your appreciation.
Top