FIXED DPSE810EG5WT GE Dryer starts when start button is pressed, But will not run, It heats, drum turns, will not run unless start button is pressed.

[MICRONS]

Model Number

DPSE810EG5WT

Brand

GE

Age

6-10 years

Gas Dryer starts when start button is pressed, But will not run, It heats, drum turns, will not
run unless start button is pressed. does not have a manual on this one.

 

[Jake]

So your saying once you release the start switch button it stops running?

If that's the case, your problem is either a faulty belt switch or faulty motor switch if you find no wires shorted or broken.

--->After the motor starts and you release the start switch, power is applied via the belt switch to motor M6, then through the motor switch to M5. Check the belt switch or just jump it out. If the motor switch is the problem, the motor must be replaced.

Here's the belt switch for your model you can order:
GE WD21X10261 Interlock Switch


Once you click the part link to the belt switch above, you will see a HOW TO video there to access/replace it. Make sure you unplug the dryer first!

Here's the motor for your model you can order if your belt switch is fine:
WE17X22217 Kit Motor and Pulley


Jake

 

[MICRONS]

Jake: Thanks for the information, I will get the parts to install and update you within a few days. Thanks again. Michael

 

[Jake]

Ok Michael, sounds good, yes keep us posted.

Jake

 

[MICRONS]

Jake.
Thanks for your help, the problem was the belt switch.
Many thanks again.

Michael

 

[Jake]

Excellent Michael, glad to hear the new belt switch fixed it.

Thanks for the update!

Jake