• Please note, some of the links on our site are affiliate links (Learn More)

FIXED DU1010XTXB1 Whirlpool Dishwasher drains within first ten min

Status
Not open for further replies.

Chel2thesi

Premium Member
Joined
Jun 9, 2021
Messages
2
Location
Louisiana
Model Number
DU1010XTXB1
Brand
Whirlpool
Age
6-10 years
Hey there. I have an older Whirlpool dishwasher Quiet Partner I. Model DU1010XTXB1. We hear it fill and begin washing but it stops about 7 minutes in and drains. After running diagnostics, I am getting 3 error codes. The first error is signaling to change water inlet valve (checked with multimeter and all checks out), error for door latch switch (also disassembled and checked with the meter, all checks out), and one last code that water isn't being detected (issue with thermistor) and it possibly being our water isn't hot enough. Checked the water temp and all is fine (120F). Any ideas before I go ahead and change the water inlet valve first? We completely opened up the botton area and cleaned all gunk out which didn't change anything.
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
121,843
Location
McMullen Valley, Arizona
The problem is the control board.

Look at this thread:
3 people had this same exact problem and the new control board fixed them all.

Here it is to order:
W10906414 Control Board


Jake
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
121,843
Location
McMullen Valley, Arizona
Excellent, glad to hear the new control board fixed it.(y)

Thanks for the update!

Jake
 
Status
Not open for further replies.
Top