• Please note, some of the links on our site are affiliate links (Learn More)

DV45H7000EW/A2-01 Samsung Dryer Not heating

Chieffantini

Premium Member
Joined
Jun 7, 2022
Messages
3
Location
Nc
Model Number
DV45H7000EW/A2
Brand
Samsung
Age
1-5 years
Have a moisture sensor model #DV45H7000EW/A2-01. We used it for six months and stored it for 5 years. We now put it in our new home and it will not heat. I do see the cooling emblem light up. Could it be the way I wired the 3 prong cord or is it something else?
 

jeff1

Appliance Tech - Moderator
Staff member
Joined
Oct 10, 2004
Messages
26,155
Location
Ontario, Canada
Hi,

What is an ?cooling emblem?

Could it be the way I wired the 3 prong cord

Sure. Did you meter test your work?

or is it something else?

Sure could be!

220voltdryer.jpg


dryer_outlet.jpg


jeff sr.
 

Chieffantini

Premium Member
Joined
Jun 7, 2022
Messages
3
Location
Nc
The cooling emblem is a light that is on and says cooling the whole time. I checked all wiring and meter tested the outlet as well. This is the second dryer that is not heating. It’s odd that two would do the same thing.
 

jeff1

Appliance Tech - Moderator
Staff member
Joined
Oct 10, 2004
Messages
26,155
Location
Ontario, Canada
This is the second dryer that is not heating. It’s odd that two would do the same thing.

Very odd!

I checked all wiring and meter tested the outlet as well.

What was the results?

The cooling emblem is a light that is on and says cooling the whole time

Never heard of this. Check your use and care manual in case something is set incorrectly and somehow you have a air fluff only setting set.

jeff sr.
 

Chieffantini

Premium Member
Joined
Jun 7, 2022
Messages
3
Location
Nc
It’s very odd that they both have done it. I got 110 and 220 when I used the meter. I will look through the manual when I get home to see if it’s set on something wrong or if I can reset it. I will let you know. Thank you very much for the information so far

Pete Jr.
 

jeff1

Appliance Tech - Moderator
Staff member
Joined
Oct 10, 2004
Messages
26,155
Location
Ontario, Canada
I got 110 and 220 when I used the meter.

Sorry to keep harping on it.....but in the correct spots?

Worked before storage.
Should work after storage.
Only change is a new power supply.

jeff sr.
 
If you feel that you have benefited from this site, and would like to show your appreciation.
Top