E30EW7CGPS2 Electrolux Wall oven over heating

[NoShoes1]

Model Number

E30EW7CGPS2

Brand

Electrolux

Age

6-10 years

Greetings. I have an Electrolux E30EW7CGPS2 wall oven that is all of a sudden over heating. I replaced the temp probe, no change, I then just changed the relay board P/N 316519200, which had no effect. It reaches set point, beeps and then just continues to heat to 450+f. Don’t want to keep throwing parts so wanted to ask the forum. Thank you

 

[Jake]

That's not the relay board you replaced, that's the convection fan and oven lights control board.

This is the relay board:

Frigidaire 316443925 Board (AP4357532) - AppliancePartsPros.com

BOARD 316443925 / AP4357532 made by Frigidaire

click.linksynergy.com

So if you set it at 250 F does it still go to 450 F. What temperature are you setting it at when it goes to 450 F? Does it stop heating at 450 F or does it even go higher than that?

The main control board is the board that the oven sensor tells to stop heating, thus the main control board tells the BAKE relay to stop heating in turn. So unless the oven is heating non-stop and goes well behind 450 F then the problem would be the main control board not processing when the oven sensor tells it to stop heating.

Here's the main control board for your model: Control-Electrical 316576630

Jake

 

[NoShoes1]

Thank you Jake. Appreciate your reply. Very helpful. Hard to get parts, would this board work? It appears to look the same

Frigidaire 316576610 Oven Control Board​

 

[Jake]

Nope, that board is not compatible for your model.

The only board that is compatible for your model is the one I posted in post #2.

Jake