• Please note, some of the links on our site are affiliate links (Learn More)
  • Important Announcement

    It's with sad news to announce that our site owner, Jake, has passed away. You can read the details here.

FIXED Electrolux Front load washer model EIFLS20QSW00 - Test Mode

Edi

Premium Member
Joined
Apr 28, 2021
Messages
11
Location
Toronto, Ontario
Model Number
EIFLS20QSW00
Brand
Electrolux
Age
1-5 years
Hello Everyone, I have an Electrolux washer model EIFLS20QSW00 that once you start a cycle it will activate the drain pump for a minute and then shows ''end cycle''
I'm trying to enter into test mode:
* Press Power to turn machine on
*Select Normal cycle
*Press start ; Power washer off / Power washer ON
* Within 10 seconds - together Hold Temp and Select(set) for 3 seconds

But I don't have ''Select (Set)'' button on my user interface
Any help will be much appriciated
Screen Shot 2023-03-28 at 7.36.00 PM.png
Screen Shot 2023-03-28 at 7.39.24 PM.png
 
Where did you get your information to do that?

EIFLS20QSW00 does not have a service manual online that I could locate.
 
I can't find anything on there site to put this thing in a diagnostic mode. Only parts list and a wiring diagram and no videos. That service manual seems to not have that information in it.Electrolux for you!(n)
 
  • Like
Reactions: Edi
Thanks bigbuck!
 
@Edi @Jake I found this that may help you get into the diagnostic mode:
Thank you so much Bigbuck!
I had very strange issue with my washer, with any cycle it would lock the door, drain and after a minute will show end cycle... The PCB was very expensive that's why I tried to get into test mode. I end up replacing the PCB and it solved the problem

Thank you for your help!
 

Users who are viewing this thread

Support Our Site

If you feel that you have benefited from this site, and would like to show your appreciation, please consider making a donation.

Back
Top