FGF328GBG Frigidaire oven igniter glows but won’t lit

[rickgburton]

I did. NOT use the wire brush to clean the holes yet... should I ??

Absolutely!

 

[Dmjones7]

Absolutely!

Ok will do

looking at the pic what do you think

 

[rickgburton]

Right color but could be bigger. It's hard to tell from that picture.

 

[Dmjones7]

More pics

 

[Dmjones7]

 

[rickgburton]

Looks OK

 

[Dmjones7]

Looks OK

Ok I’m letting it cool down then I’m gonna clean it will the wire brush.... if it still not getting up to temperature would you say I need to replace my temperature sensor?

 

[rickgburton]

Check it first. It should measure about 1100 ohms at room temperature. If it's not reaching the set temp and the flame remains on, replace the oven valve.

 

[Dmjones7]

Check it first. It should measure about 1100 ohms at room temperature. If it's not reaching the set temp and the flame remains on, replace the oven valve.

Ok so cleaned with brush still not getting up to temperature.... get a oven valve replacement??

 

[rickgburton]

Yes, if the flames for the top surface units are big enough then the regulator is probably OK. Replace the oven safety valve. Just to make sure we are on the same page, when you set the oven to 350° the oven turns on and stays on but doesn't reach the temperature set point. Is that correct?

 

[Dmjones7]

Yes the highest it gets in oven valve

 

[rickgburton]

Replace the valve.

Frigidaire 3203459 Oven Safety Valve - AppliancePartsPros.com

Oven safety valve 3203459 / AP2131109 made by Frigidaire

click.linksynergy.com