ApplianceFirst
Premium Member
- Model Number
- GDF510PSD2SS
- Brand
- GE
- Age
- 6-10 years
OK so normally when I have an issue with these GEs the buttons won't work needs a panel or the MCB goes bad or the cmos trips and I can reset it. This time a little different.
So all the buttons and lights come on. Everything works except the start button.
I hold start and select and it goes to consumer. I hold select, it goes to service mode. All tests work flawlessly, able to start and stop each test WITH the start button. When I exit, won't start. It sees the door is open/closed when launching consumer mode so it's not door switch (also pauses during tests if I open). But the bugger just won't start a normal cycle outside of service mode. Any ideas?
So all the buttons and lights come on. Everything works except the start button.
I hold start and select and it goes to consumer. I hold select, it goes to service mode. All tests work flawlessly, able to start and stop each test WITH the start button. When I exit, won't start. It sees the door is open/closed when launching consumer mode so it's not door switch (also pauses during tests if I open). But the bugger just won't start a normal cycle outside of service mode. Any ideas?