GDT665SSN3SS GE Dishwasher stops mid cycle

[umthevem]

Model Number

GDT665SSN3SS

Brand

GE

Age

1-5 years

Hey folks, looking for a bit of help here, my GDT665SSN3SS is about 2 years old and for some reason has been stopping mid cycle, I cleaned out the filter in the bottom but at this point am not sure what else to do. It lasts about 20 mins and then stops. As soon as it stops I can open it up and turn it back on again.

Seems to drain fine and no indicator with the front LED, it just goes dark

Read these threads and wondering if I can follow the same thing even though my model is is GDT665SSN3SS

FIXED - GE Dishwasher GDT665SSN2SS lights up but won't start cycle

Hi, my GE dishwasher GDT665SSN2SS won't start its cycle. When I push start and close the door, the orange active light turns on, but nothing starts. Perhaps it is in demo mode? How can I troubleshoot this issue? Any information would be helpful. Thank you. Added complete model number

www.applianceblog.com

GE Dishwasher GDT665SSN0SS not completing cycle

Always has power. Has never tripped breaker. Door switch replaced twice. No water or moisture noted. SN MM739534B symptoms have been the same and intermittent. Tech says there is no way to troubleshoot codes or any lights but I’m not believing that after reading threads like this...

www.applianceblog.com

Corrected model number

Mat

 

[Jake]

my GDT665SSN2SS is about 2 years old and for some reason has been stopping mid cycle

my model is is gdt665ssn3ss

Which is is 2 or 3 ?

Jake

 

[umthevem]

3

 

[Jake]

Thanks!

Yes, your model uses the exact same pressure sensor.

Follow what I mentioned in post #2 here:

FIXED - GE Dishwasher GDT665SSN2SS stops midcycle

Model: GDT665SSN2SS Serial: GR719030B Initial Problem: Our GE dishwasher stopped working mid-cycle and also intermittently showed an error code of H20 A GE service technician came onsite, found that the water tank was filling up and said that the problem was with the control board He ordered a...

www.applianceblog.com

Jake