GDT695SMJ0ES User interface replaced but not all lights come on

[Suzit2022]

Model Number

GDT695SMJ0ES

Brand

GE

Age

6-10 years

I just changed the user interface on my GDT695SMJ0ES dishwasher because it would not turn on and no lights would come one. It appeared to be dead. I read a lot of threads on how to changed it and set the personality jumpers. I set the personality jumper to #11 as stated on the instructions for my model. Now a couple of the lights come on but not all of them and the dishwasher still won’t run.

The original UI board did not have a personality jumper. Should I remove the jumper and prongs from the new board? Or should I try all the other jumper settings to see if any of them work?

 

[Jake]

Do you have the jumpers set correctly for the GDT695 based on the attached photos?

Your model I put a RED box around it. Your personality jumper 11 is good. But make sure the jumpers are set just like in those photos.

Here's the UI Board for your model: WD21X31902

 

[Suzit2022]

Yes we had it set to 11… I guess we just had to redo it a couple of times and it finally worked.