• Please note, some of the links on our site are affiliate links (Learn More)

GDT695SMJ5ES GE dishwasher dead display

Grambo90

Premium Member
Joined
Jul 23, 2022
Messages
2
Location
Ohio, USA
Model Number
GDT695SMJ5ES
Brand
GE
Age
1-5 years
I have a GE dishwasher with a dead display. The light on the main control board is blinking and I am getting 13 volts going to the user interface board. Do I need a new user interface board?
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
135,699
Location
Vicksburg Junction, Arizona
Yes, you are correct, you will need to replace the UI Board.

Here's the UI(user interface) Board for your model: WD21X23462 Kit Svc Ui Top Logic

To replace it--->You will need to remove the whole door, then separate the door, then remove the front control console, to replace the UI Board.

Here's the service manual for your model: https://drive.google.com/open?id=1M-G9W3HiaYnihdB5Cy-jfSPoVf8DZ7j7

Page 28 Door Removal
Page 30 Separate Door
Page 31 Front Control Console Removal
Page 32 UI Removal

NOTE--->When replacing UI control boards, the new UI Board MUST be configured as per the instructions included with the replacement. If the personality is not set by using the 4 jumpers, the buttons, LED’s or cycles will not function properly.

Let us know how it goes.

Jake
 

Grambo90

Premium Member
Joined
Jul 23, 2022
Messages
2
Location
Ohio, USA
Jake,

Thanks for all the help!

It seems like many of the UI boards are on back order, but I found one in stock here: genuinereplacementparts.com/mobile_product_info.php?products_id=6731317

I will make sure to set the personality and let you know how the install goes.

Grambo
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
135,699
Location
Vicksburg Junction, Arizona
Ok Grambo, yes keep us posted.

Jake
 
If you feel that you have benefited from this site, and would like to show your appreciation.
Top