FIXED GE DDT595SMJ0ES No Power on control panel

[klhowman]

Model Number

DDT595SMJ0ES

Brand

GE

Age

1-5 years

Hello,
I've read about every thread on here. My dishwasher had been randomly beeping for some time. One day it just quit. I check the main control board and the light is steady green. I checked the circuit board and am getting 14 volts. I bought a new UI panel, set the jumpers, and hooked it all back up. Still no power. I tried holding the cycle and start buttons for many seconds, still nothing.

Any suggestions?

 

[Jake]

On Your model, yours uses this UI Board WD21X31910

Are you absolutely sure you set the jumpers properly?

Look at the video in this thread here:

FIXED - DDT595SMJ0ES UI Board Part Number Confirmation

I am having trouble with my User Interface Board, it is unresponsive and the main control board has a STEADY ON green LED. I have found a couple of posts with similar symptoms: Post 78436 and post 80234. I still need to perform the measurements recommended by these posts to confirm the board is...

www.applianceblog.com

 

[klhowman]

Hey Jake,
Thanks for the reply. I was about to put it to the curb, but I turned the breaker off and me and my wife went to dinner. I came home, turned the breaker back on, and I heard it beep from the basement. I ran upstairs and magically it works now.
I have no idea why it works now and it didn’t before, but it made my night.
Thanks again

 

[Jake]

Excellent, glad to hear that.

Thanks for the update!