GE dishwasher DDT595SMJ0ES beeping 3 times at start

[Joshmainstreet]

Model Number

DDT595SMJ0ES

Brand

GE

Age

1-5 years

Hello , my GE dishwasher beeps 3 times when trying to start. Also, showing 815 when entering Error Mode with all LED’s flashing, even when door is closed. When entering Service Mode and running increments tests , it will not allow me to start any test, Start just continues to flash as if door is still open. I have since replaced the door latch and issue still resumes . Any suggestions , should I check any specific fuses or go straight to machine control board?

 

[Jake]

Hi Josh,

--->Check your main control board STATUS LED, Tell us how many times its flashing in a row, or if its STEADY ON or STEADY OFF.

--->Here's the main control board for your model: WD21X24901 Machine Control

Restore Power, then make sure the door harness connector is attached to the bottom of the control board casing connector when you view the STATUS LED light, Also make sure the 120 volt connector to it in the front is still attached to it also.

Jake