GE Dishwasher GDT665SMN2ES constant pump draining

[rdavis006]

Model Number

GDT665SMN2ES

Brand

GE

Age

1-5 years

Start cycle and drain pump starts and wash cycle will not start and pump continues to run. Can go through each cycle in diagnostic mode just fine. If i put it in diagnostic mode and let it fill then take it out of diagnostic and put it in to normal cycle it will begin to drain then i close door it goes into fill and wash cycle and compltes all cycles as normal. Any idea whats wrong?

 

[Jake]

The pressure sensor being clogged would cause that drain pump to keep running, I'd check that first. Disconnect power to your dishwasher first.

Look here:

FIXED - GE Dishwasher GDT645SYN0FS - Drains, but pump keeps running ( intermittently )

The dishwasher was working fine ( when it works ). It started to finish prematurely ( without the white lite to indicate successful completion ). Here is what I have observed. The unit drains, but the pump keeps running, until it errors out. This does not happen all the time. Today for...

www.applianceblog.com

Here's the pressure sensor for your model:

GE WD21X25468 Pressure Sensor Asm (AP6976524) - AppliancePartsPros.com

Pressure sensor asm WD21X25468 / AP6976524 made by GE

click.linksynergy.com

Watch this video to access it:

Jake