• Please note, some of the links on our site are affiliate links (Learn More)

GE GSE25HMHBHES reading -9 on freezer + frosted coils

rakjr2875

Premium Member
Joined
Nov 23, 2021
Messages
23
Location
Florida
Main board replaced again, front display board replaced. Still -9 On the display for the freezer.

Used this guide https://allthumbsdiy.com/appliances...display-control-to-access-self-diagnosis-mode

To get in to the diagnostic mode, ran the code to check the thermistors, gave a “O” for the 3rd one, which is the freezer thermistor. All others tested fine. Replaced said thermistor again, still -9 on the display.

At this point could it be a short in the wire going from that thermistor to the main board?
 
Top