GTW680BSJ4WS Washer not spinning but just agitates when testing in diagnostic mode and in regular spin cycle

[Andyh261]

Model Number

GTW680BSJ4WS

Brand

GE

Age

1-5 years

Model number: GTW680BSJ4WS
Serial number: DH156867G

So this has been happening for the past 2 months I believe (honestly lost track of when it started). But the main problem is that the washer just starts up, loads water and just doesn’t spin and it ends. I tested the spin in diagnostic mode but it just agitates left and right slowly. Did the faulty codes as well and the codes were about the lock and I don’t really want to try and replace a part in my washer unless all solutions have been tested. Is there a way to fix my problem?

 

[Jake]

Here's the service manual for your model: https://drive.google.com/file/d/1FiXXV68WvPZ4ukyUXtY7PGIV2C8bpVkK/view?usp=sharing

Page 32 tells you how to get the washer in Consumer Error Mode to check for any fault codes.
Page 39 are the fault codes.

In the service manual I posted the link to above check both the Speed Hall Sensor(Speed Sensor) and Mode Shifter.

Speed Hall Sensor--->Page 62

Here's the speed/hall sensor for your model: Speed Sensor WH03X32158

Mode Shifter Page--->63

Here's the mode shifter for your model:

GE WH03X30517 Washer Mode Shifter (AP7014559) - AppliancePartsPros.com

Shifts the washer between spin and agitate, WH03X30517 / AP7014559 made by GE

click.linksynergy.com

Jake