• Please note, some of the links on our site are affiliate links (Learn More)

GU1200XT not getting dishes clean

Team Irish

Premium Member
Joined
Nov 7, 2008
Messages
20
Location
Indiana
I have a Quiet Partner GU1200XT that I bought from a neighbor that is not getting the dishes clean. It leaves food and a residue on the dishes.

I checked the spray arms which seem to be fine. The water is getting very hot and the pressure in our house is very good.

Last month I replaced the check valve and the chopper, but this hasn't helped.

What else could be wrong?
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
139,471
Location
Vicksburg Junction, Arizona
Hi,

GU1200XT is just a partial model#, whats the complete model#? The model# tag is located inside the dishwasher on the upper tub walls.

Sounds like you will need a new motor. Whirlpool had a few issues on that model with the motors.

You can order just the motor alone, or the motor/sump assembly which is higher in price, but easier/less steps to install.

Jake
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
139,471
Location
Vicksburg Junction, Arizona
Thanks,

Here's the sump/motor assembly for your model:
Part#8535150
show

show


Here's the motor alone:
Part#8534942
show



Here's the repair manual for your model, it explains how to change both:
https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/52521bdbd0ef763c85256cbc00520548/$FILE/8178022.pdf

Jake
 

Team Irish

Premium Member
Joined
Nov 7, 2008
Messages
20
Location
Indiana
Thanks Jake. How much harder is installing just the motor? My husband and I are both quite handy.
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
139,471
Location
Vicksburg Junction, Arizona
Its not to much harder, just takes more time and abit more involved, but if you follow the instructions in the repair manual, you should have any problems.:)

Jake
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
139,471
Location
Vicksburg Junction, Arizona
Sometimes, check the motor impeller, does it look worn out or beat up? Is the motor impeller stripped from the motor shaft, free turning on its own?

Jake
 

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
139,471
Location
Vicksburg Junction, Arizona
Ok, from my experience on these models, installing a new sump/motor assembly usually fixes the problem 95% of the time.

If you order the sump/motor assembly from the link I posted above and install it and it doesn't fix the problem, you can return it within 30 days for a full refund.

Jake
 
If you feel that you have benefited from this site, and would like to show your appreciation.
Top