FIXED KDFE104DSS2 Kitchenaid Dishwasher no power or lights TouchPad

[Jtaylor20]

Model Number

KDFE104DSS2

Brand

KitchenAid

Age

1-5 years

KDFE104DSS2 has no power,lights,or response on touchpad.

I checked incoming voltage to board and got 120. Picture below. I also accidentally smoked up the contacts while checking for voltage, but I still get 120 hope I didnt mess nothing up.

I'm just a dumb lineman for the local utility. Any help is appreciated.

 

[Jake]

I'm attaching the tech. data sheet below.

To check for voltage at the control board--->P4-1(WHITE wire Neutral) and P4-2(BLACK wire Line).

Lets first check the door switch. Check the resistance of the door switch with a multimeter. Should be less than one ohm. High ohms=bad switch.

Here's the door latch switch assembly for your model you can order if yours is bad:
Door Latch WPW10653840


There is a video in the door latch switch part link that shows you how to remove it and replace it.

Jake

 

[Jtaylor20]

Jake

Thanks for the quick response. When I took the panel apart to expose the board, the board was actually dangling by the wire going to the touchpanel, instead of attached to the back panel.

I robbed a screw from the panel, attached the board correctly and plugged the connector back up to the board and everything works now.

 

[Jake]

Excellent Jtaylor, glad to hear that's all it was.

Thanks for the update!

Jake