FIXED KDRS483VSS00 control relay board

[scott ibison]

Model Number

KDRS483VSS00

Brand

KitchenAid

Age

6-10 years

PLEASE HELP..... I need to replace the relay control board on my KDRS483VSS00 and am having difficulty finding the board, can anyone help with this?

Corrected model number

 

[Jake]

Hi Scott,

Nothing pulls up for KDRS483VSS3. Please recheck your model number.

Jake

 

[scott ibison]

Sorry,KDRS483Vss00
Seriel no.d01559539

 

[scott ibison]

 

[Jake]

Thanks!

Its located on the top venting parts. You will need to turn the breaker off first, then remove the control panel and it should be behind there. You may have to pull the oven out from the wall a little to remove the control panel screws.

Here it is for your model:

Whirlpool WPW10116185 Electronic Control Board - AppliancePartsPros.com

Electronic Control Board WPW10116185 / AP6015179 made by Whirlpool

click.linksynergy.com

Jake

 

[Jake]

Wait I was wrong, its in the back of the range on the bottom. Pull the range out from the wall first.

Jake

 

[scott ibison]

Yea I have had the back off but the thing must be burried somewhere near the wheels under the range, it's quite complicated back there and very heavy

 

[rickgburton]

You can access it from the front behind the lower trim. This is model KDRP487 The difference is yours is Standard, this one is Professional. On the professional model the two ovens are the same size. The 3 is just a feature pack with more features for 7. The parts should be in the same place on both machines:

 

[scott ibison]

Rick, thank you so much, unfortunately this is not even close to the range I'm dealing with.

 

[bigbuck]

This is the exact tech sheet for your model.

 

[rickgburton]

OK, sorry

 

[Jake]

Thanks BB!

Look on page 5 of the tech data sheet. It's called the Appliance Manager, it looks like its in the back underneath, X marks the spots of the appliance manager. LOL

Jake

 

[scott ibison]

Ty all

 

[Jake]

We are glad to help Scott, let us know how it goes.

Jake

 

[scott ibison]

wow very hard to get to, should i use a jack or just turn the whole unit over?? is it ok to just flip the thing over??

 

[Jake]

That's a good question Scott, but I don't know, I've never replaced the appliance manager on this model before.

Hopefully Rick or BB knows.

Jake

 

[scott ibison]

fond it! if anyone cares or needs to know in the future the control/relay board can be accessed by taking off the kick plate on the front of range and removing two screws from the frame on the right hand side of the oven, the board will slide out in a stainless steel tray, very easy to access.
because im not always the smartest, ive had this range taken apart into at least 100parts looking for this thing!


thank you, everyone that commented and helped me figure this out!

 

[rickgburton]

You can access it from the front behind the lower trim

unfortunately this is not even close to the range I'm dealing with.

Not even close? ...Lol

 

[scott ibison]

rick sorry you were right!!!!!!!
thank you once again

 

[rickgburton]