KDTM404KPS0 KitchenAid Dishwasher 9-1 error persisting with standing water

[Gambrella]

Model Number

KDTM404KPS0

Brand

KitchenAid

Age

1-5 years

Hi

I have a relatively new dishwasher that is having trouble running a cycle. I did troubleshooting a couple weeks ago and replaced the inlet valve. After that replacement, the dishwasher ran fine for about two weeks. Tonight, it errored out again and is giving the 9-1 error with standing water. I did the reset cycle (the 1-2-3,1-2-3,1-2-3 thing) and got he same error. What should I do next?

Thanks!

 

[Jake]

Sounds like the drain pump is bad, or clogged. I'd remove the drain pump first and check it for clogs. Also remove the drain hose from the garbage disposal(or sink plumbing) to see if you have a clog there.

Yes, F9E1--->Draining: Product Not Draining

Here's the drain pump for your model: W11412291

On this model you have to remove the entire dishwasher to get access to the drain pump.

This video shows you how: https://cdnapisec.kaltura.com/index...id/37942631/entry_id/1_r13dks86/embed/dynamic

Jake