Kenmore 110.20022013 EXTREMELY off balance during spin

[joeleaux]

Model Number

110.20022013

Brand

Sears Kenmore

Age

6-10 years

My Kenmore washer is shaking VIOLENTLY on spin. I'm talking it sounds like someone is breaking down our back wall. LOUD and VIOLENT!

I replaced the suspension rods and it worked fine for about a week and is now doing the same thing. Google searches mentions a clutch (no clutch listed for this model) or the counter balance spring (again, no counter balance springs listed).

Not sure what else it could be.

 

[Jake]

That should of fixed it. Did you order the correct rod spring kit for your model?

Did you run the calibration after you replaced them?

Here's the suspension rod spring kit for your model:
W10780048 Suspension Rod Kit


These members below all said it fixed their washers:

FIXED - Roper RTW4640YQ1: LOUD banging noise during spin sycle

Good afternoon! Our washing machine is making a VERY loud noise during the spin cycle. It's a banging noise—it's very scary. I've leveled the washer's cabinet and that made no difference. Today I removed the upper portion of the cabinet/lid and discovered that the "ring tub" (part number 5...

www.applianceblog.com

FIXED - 7EWTW1509YM0 Goes out of balance on spin

This washer goes out of balance oin spin. I just bought it used. It was moved on its back not standing up I checked the 4 rods the drum hangs on and one had popped out of place. I returned that to position but still have out of balance. I can make the drum hit the cabinet very easly using my...

www.applianceblog.com

FIXED - WTW4800XQ1 washer tub's excessive play

This Whirlpool, Model WTW4800XQ1, top loading washer is only 2 years old! The complaint was that they (family member) could only wash small loads at a time and when I went to have a "look," I was shocked to find the washer's tub was very loose. It seems to have excessive play, as I could...

www.applianceblog.com

I also replaced this same rod spring kit on a washer in Parker, AZ. over the summer and it fixed it.

Jake

 

[joeleaux]

I was told nothing about a calibration. Please tell me more.

 

[Jake]

Here's the tech. data sheet for your model: https://drive.google.com/open?id=1psVH4VJFVWLEFo_Kf8Dwp9OlD8vPDuVG

CALIBRATION MODE is on Page 4.

Jake