Kenmore Range C648430 Control board

[Nalacat]

Model Number

C648430

Brand

Sears Kenmore

Age

6-10 years

I have a Kenmore c648430 Oven. The Oven control board blew up during a hurricane power surge. The current board is ES535 with model number 326462604B.
I looked everywhere for the same model but couldn't find it.

Then I looked online here: https://parts-listing.com/index.php?action=modelDetailed&modelId=1808
And found that the model number they list is different.

Will the Kenmore/Frigidaire 316462808 be a replacement part for it?

Thanks

 

[Dan O.]

The current board is ES535 with model number 326462604B.

That does not appear to be a Frigidaire part number. Can you post a photo of the label the number is printed on?

Will the Kenmore/Frigidaire 316462808 be a replacement part for it?

I do believe 316462808 is the correct number for that model as I posted in a previous forum message (C648430 kenmore won't turn off) but if you contact Frigidaire Canada they should be able to send you a parts list for your range as they made that range for Sears Canada.


Dan O.

 

[Nalacat]

Hi Dan,

thanks for your reply.

I can't take a photo now because I had to move the stove back in place, but I copied down everything written on the board.

It is a Kenmore and believe it is about 8 years old.

The Oven Control schematic writes it is ES 535/540.

The board itself has 316462604 B, REV X35 on The right side of the board.
On the left side it had 2604101392555
On the top side of the board, ES 535 is written.

I will give Frigidaire a call on Monday when I can get to the back of the oven again

 

[Dan O.]

The board itself has 316462604 B

That is different than what you originally posted. I can not trace 316462604 either though.

See what number the actual parts list says it should take.

Dan O.

 

[Dan O.]

Bigbuck supplied the parts list (attached here), thx. It does call for electronic control part # 316462808


Dan O.

 

[Nalacat]

Thank you so much!

À question though. My oven control looks like this. Will the 316462808 control work the same? I think I saw there is another button on it. Should I also get the button display to fit on top?

 

[Dan O.]

I have no personal knowledge of that part. I can only go by the parts list.

Usually the control “overlay” can be transferred. If the original is damaged or can not be transferred, than another overlay might also be required.


Dan O.