Kenmore Ulltra wash

tttraveler

Member
Joined
May 10, 2005
Messages
1
Location
, ,
imported post

Kenmore ultra wash model 665.17801890 .First I must say this site fixed the first problem but now I have created a leak. 1st dishwasher wouldn't drain so I attempted to remove every thing from the top down. I was unable tobreakthe screw freefrom the pump impeller as my socket was slipping on the impeller. Hence closed it all up and found this web site and after removing the plastic drain and check valve found what was the no drain problem and reinstalled. Know I have leaks/small drips at the motor. Any suggestions
 

jeff1

Appliance Tech - Moderator
Staff member
Joined
Oct 10, 2004
Messages
23,708
Location
Ontario, Canada
imported post

Hi,

**Know I have leaks/small drips at the motor**

Where the motor shaft enters the pump body? Around the motor and pump body?

Seal inside might be damaged....

Seal and impellor kit

Or you can replace the whole unit....

Pump and motor complete

jeff.
 
Top