Maytag MVW7232HW0 it says the lid lock not working

[Dem29]

Jake I have Maytag MVW7232HW0 it says the lid lock not working. When I went into diagnostics I can't activate anything. Its says its doing it but isn't. The screen display has a question mark on top. I replace The computer board. That wasn't the problem, Next I replace the lid switch that didn't work. The computer Board has a green light that flashes 1 time a second. Looks normal.

The interface board is the only other thing that gives the commands to do the outputs. This interface seem to be working to with a green light that flashes 1 time a second. This interface sends the signals to the control board over just 3 wires. These are expensive boards. I can't get much information on this washer and I'm still puzzle way it doesn't work. This is the second Maytag that I had that does the same things. If you seen this before let me know how I can solve this problem with this type of problem. Thanks

 

[Jake]

So you replaced the main control board ACU?

Here's the ACU for your model: Cntrl-Elec W11419171

Here's the UI(User Interface) Board for your model: Panel-Ui W11478526

Can you get into the diagnostics now with the new main control board ACU?

I'm attaching your tech. data sheet below.