FIXED MVWC465HW0 Maytag washer going back to start cycle

[Matz99]

Model Number

MVWC465HW0

Brand

Maytag

Age

1-5 years

Hi
This Maytag washer had a problem spinning. Actuator was replaced & washer worked okay. After a few loads lady tried using second rinse.
Washer then went back to starting wash cycle. Thinking I should be going back with a new main control board( its a further away call).
Any other suggestions?

 

[Jake]

I found a service bulletin on this problem.

I posted it in post#2 here: FIXED: WTW4900BW0 Washing Machine, starting by itself, continuous cycles, etc

Let us know if that fixes the continuous cycle issue.

Jake

 

[Matz99]

Hi
Ended up replacing the main control board. Also replaced the water valve. Our
wonderful world of electronics!!! Thanks again for your info!!

 

[Jake]

Excellent, glad to hear that.

Thanks for the update!

Here's the main control board for this model in case others need it too:

Whirlpool W11218739 Cntrl-Elec - AppliancePartsPros.com

CNTRL-ELEC W11218739 / AP6331247 made by Whirlpool

click.linksynergy.com

Here's the water inlet valve for this model in case others need it too:
Water Inlet Valve W11210459


Jake