NTW4516FW3 Amana washer capacitor - wont start

[dartman]

Model Number

NTW4516FW3

Brand

Amana

Age

1-5 years

Question about capacitor, Amana washer NTW4516FW3, The original cap. W11428524 has a coil in the cap, the replacement LP4665 does not show one, will this make a difference?
Thanks

Corrected model number

 

[Jake]

Here's the OEM capacitor for your model: https://www.repairclinic.com/PartDetail/Capacitor/W11158830/4784586

the replacement LP4665 does not show one, will this make a difference?

That I don't know.

 

[dartman]

Hi Thats not the one,its W10804655 that mine takes,I was wondering about the inductor in the cap if it has to be one that has it.

 

[Jake]

W10804655 No Results Found.

The original cap. W11428524

You said that was the original, now I'm totally confused.

Here's the OEM capacitor for your model: https://www.repairclinic.com/PartDetail/Capacitor/W11158830/4784586

 

[dartman]

sorry Jake But now I have no start,ran the reset and diagnostic and everything works, but when you hit start button I get nothing, what do you think? green light on board is on

 

[dartman]

also model # is NTW4516FW3 my mistake

 

[Jake]

Here's the tech. data sheet for your model: https://drive.google.com/file/d/1_VSk1cuHgkuPVOZYUPCZVccBNI6G6KQG/view?usp=share_link

You can get into the ACTIVATING THE SERVICE DIAGNOSTIC TEST MODES and see what fault code you get.

On Page 2 of your tech. data sheet do: ACTIVATING THE SERVICE DIAGNOSTIC TEST MODES

Then do FAULT CODE DISPLAY MODE on Page 3

Then you can see what fault code/codes you are getting on Page 6 and Page 7: FAULT/ERROR CODES

If you get no error codes go to Page 10 where it says WON’T START CYCLE