NVL333EB6CC Hotpoint Drum won't lift out

[pellomen]

Model Number

NVL333EB6CC

I'm trying to remove the drum to replace a noisy bearing, but after loosening the belt, the drum will not pull out. I've removed the 3 screws in the back of the drum and pulled it out that way, but the plate is still stuck on the bearing. Any thoughts?

 

[pellomen]

After some extra heaving, I was finally able to get the bugger out. No further assistance needed.

 

[Jake]

Hi,

Yes, I've many that get stuck like that too, forcing it out is basically the only way to remove the drum.

Here's the rear bearing kit for your model:
Drum Bearing WE25X10001


Whenever you change the rear bearing, its recommended to also change the front felt assembly.

Here's the front drum felt assembly for your model:
WE09X10013 Felt-Upper


Jake