PDT715SYN0FS GE Profile-3 Beeps Won’t Start

[Dgw122]

Model Number

PDT715SYN0FS

Brand

GE

Age

1-5 years

This seems to be a popular topic, but I haven’t seen my model # posted and want to make sure there’s nothing more I need to check out before ordering parts.

Having the same issue-I hit start and I get three beeps. I’ve shut off power to the dishwasher for 15 mins and that did not work. I also pressed “Start” and “Select Cycle” simultaneously for 5 seconds and closed the door. The LEDS continued to blink. This makes me think the problem is the door latch, especially since we had the control board replaced when it was still under warranty about a year ago.

Is there anything else I need to do or would replacing the door latch be a safe option?

 

[Jake]

Hi,

Page 23 explains how to ohm test your door latch switch: https://drive.google.com/file/d/15CmFe-hcufL5XUJPsqlEN3AzwDZ6z0M-/view?usp=sharing

Here's the door latch switch for your model:
WD21X10490 Latch Switch


To Verify the door latch switch is good--->Follow the directions here:

Door closed: 0 ohms.
Door open: infinite ohms.

Let us know what you find. Make sure you disconnect power to the dishwasher before ohm testing.

Jake