• ** REMEMBER! **The microwave can still shock you even unplugged!!

    ALWAYS discharge the high-voltage capacitor first if you even think your hands will come close to any HIGH VOLTAGE components.

    Jeff mentions this: Anything in the high voltage ( magnetron, capacitor, diode, wires to and from ):
    ...Use a metal ( not the shiny chrome type ) screw driver with a insulated handle to short across ( touch both at the same time ) the terminals of the high voltage capacitor to discharge it.

    From Jeff's site: http://www.applianceaid.com/component-testing.php

    Jake

RSW459P Amana - Wire locations on control board

Aron

Member
Joined
Apr 24, 2017
Messages
1
Location
atlanta
Model Number
RSW459P
Brand
Amana
Age
More than 10 years
Hello,
I made a repair to an old Amana. However, when first tugging on the control board to remove, all the (very short) wires in the back were pulled out before i could mark their locations. There are 4 wires and 4 plug-in points. Can someone help me determine where to plug these in before I FRY my control board! thank you so much in advance for getting me out of this bind. see pictures! Thank you, Aron

Plug-in Points
1. P4-D
2. P5-C
3. P6-B
4. P7-A

Wire colors: BLACK ORANGE RED YELLOW
 

Attachments

Top