• Please note, some of the links on our site are affiliate links (Learn More)

Samsung NX58H9500WS/AA oven and broiler not working

mikeycfl

Member
Joined
Dec 14, 2022
Messages
1
Location
Atlanta, GA
Model Number
NX58H9500WS/AA
Brand
Samsung
Age
6-10 years
My broiler initially stopped working. The igniter glowed bright and I checked resistance vs the oven igniter (which was working at that time) and it was the same. Then my oven and roaster mode started losing the ability to hold a temp. It would go up to temp, then start dropping. I could turn it off, then turn it on and it would go up again, then start dropping. My error code was a E-2E. So I ordered a replacement pcb board and temp sensor.

Now the oven and broiler don't even start. No error code. On bake T504 to T505 shows 0V, T504 to T503 shows about 40V ?? On broil T504 to T503 shows nothing.
 
Last edited:

Jake

Appliance Tech - Admin
Staff member
Joined
Aug 24, 2004
Messages
137,406
Location
Vicksburg Junction, Arizona
Sounds like you received a defective relay control board, look what Rick mentioned in this thread:

Here's the relay control board for your model:
 
If you feel that you have benefited from this site, and would like to show your appreciation.
Top