Samsung RF24FSEDBSR - LED Temperature Readout in Refrigerator Reads Incorrect Temperature and it shows a 2 E error

[dchabot1]

Model Number

RF24FSEDBSR

Brand

Samsung

Age

6-10 years

Refrigerator temperature reads incorrectly on the LED readout. The temperature eventually starts flashing. To clear the flashing the refrigerator must be unplugged. When the refrigerator is plugged back in the LED shows a 2E error.

The evaporator fan in the refrigerator does appear to be coming on. I tested it outside of the refrigerator and it works. I have replaced the main board and the temperature sensor. What's left?

 

[Jake]

ERROR 2E is the Fresh Food Temperature Sensor.

Here's your service manual: https://drive.google.com/file/d/1B6hg6ruMXU7t8l2ucd3uhdfJlHnZ7Om0/view?usp=sharing Page 72.

Did you ohm test it first?

Is this the one you replaced: DA32-10104N

Rick posted the resistance/temperature chart here:

FIXED - RF28HFEDTSR/AA - Temp on screen says 80 degrees and freezing fresh food

I have a Samsung RF28HFEDTSR/AA. The display shows 80 degrees when it comes on for fresh, and displays accurately for freezer side. I replaced the sensor that is located behind the back panel of refrigerator section. (this was the part I used: DA32-10104N SENSOR TEMP ) That did not resolve the...

www.applianceblog.com

Jake