Samsung Washer WF330ANW/XAA-01 no high speed spin

[BugherMarine]

Model Number

WF330ANW

Brand

Samsung

Age

6-10 years

Have a Samsung WF330ANW/XAA-01 with "Vibration Reduction Technology". It used to start a low spin and would "sense" the imbalance and stop/start to redistribute the clothes until it "sensed" a smooth balance, then it would ramp up to high speed spin. Lately, it starts a low spin but just shakes and never stops/starts to re-distribute the clothes and balance the load. It then does a medium speed shaking spin and stops. Clothes are damp-dry but nowhere near as dry as when it used to do high speed spin. What should I check/replace?

 

[Jake]

Hi,

Its possibly the shocks causing this problem.

Here's the front shock absorber for your model:
DC66-00470A Shock Absorber


Here's the rear shock absorber for your model:
DC66-00470B Shock Absorber


Also look at what @EugeneK said to check here:

Samsung WF218ANW/XAA-- won't go into high speed spin

The washer started having the common spin/drain problems. Cycle would finish but clothes would still be somewhat wet. Occasionally I'd get the ND (no drain) code. Sometimes it would just stop with say 11 minutes left and sit. Other times it would have 11 minutes left to finish and would try for...

www.applianceblog.com

Jake