FIXED WFE366LVS0 Whirlpool Oven vintage 2010 - Loose Door handle & glass

[JRWooden]

Model Number

WFE366LVS0

Brand

Whirlpool

Age

More than 10 years

My daughter just bought a house....
Oven/range is ~2010 vintage Whirlpool contractor grade appliance.
I've looked for model number but can't find it ... (used the "finder" page on this site)
It doesn't seem to be in the usual places.

But here's a pic. of the beast:


Oven handle is loose. she opened the door and the glass fell out
fortunately she caught it, she didn't get cut and it didn't break.

I figure I need to remove the door disassemble, put it back together with
new handle fasteners and likely good to go...
Handle fasteners being responsible for holding the glass in place?

On other ranges I've been able to open the door to the broil position
and just pulled up to remove door, that doesn't work here ...

Any pro-tips would be appreciated!

Added model number

 

[JRWooden]

Sorry Pic did not load ... here it is:

 

[Jake]

Without a model number we are dead in the water.

Did you look for the model number tag at the bottom front of the range, after you pull out the lower storage drawer?

Also look behind the control panel console.

 

[JRWooden]

Without a model number we are dead in the water.

Did you look for the model number tag at the bottom front of the range, after you pull out the lower storage drawer?

Also look behind the control panel console.

Jake:
THANKS very much!
I looked for hints on the AppliancePro website but it didn't mention the storage drawer....

It's a WFE366LVS0

It looks like maybe (????) I unscrew the two #13 screws on bottom of door and then can remove the assby?????

 

[Jake]

Yes, the #13 screws.

The outer oven door glass is #11:
Door Glass WPW10118455


This video should help you:

 

[JRWooden]

Thanks very much Jake as an amateur .... I failed to notice the to little flip-up clips on the hinges

My pregnant daughter will be very happy

Again thanks!

Dang - I can't find the link to the "donation" page ... if you post it I'll send one ;-)
Y'all have now saved my bacon twice!

Jim

 

[Jake]

Excellent Jim, good job fixing it.

Dang - I can't find the link to the "donation" page ... if you post it I'll send one ;-)

Its at the very bottom of this webpage.

Thanks for the update!

 

[JRWooden]

Excellent Jim, good job fixing it.


Its at the very bottom of this webpage.

Thanks for the update!

Done!!!

great site Jake!

 

[Jake]

Thanks! I got it.