Dzav
Premium Member
- Model Number
- WSF26C2EXF01
- Brand
- Whirlpool
- Age
- 6-10 years
Like everyone else when my icemaker stopped working I found cut wires under door. This repair brought back ice making. But I am still not getting power to the auger. The auger had stopped some time ago and I had tried everything I could think of to fix it. I thought these wires bring fixed would bring it back too but no such luck. The ice shoot door opens when pad is pushed so that connection is good.
I hear a short click sound when auger should turn on. I tested the auger and it works when it gets power. Is there a way to know which one of those wires in the harness under the door operates the auger? 2 of my wires did not seem to have damage so if it is one of those then I will check them again.
Any other suggestions? Thanks.
I hear a short click sound when auger should turn on. I tested the auger and it works when it gets power. Is there a way to know which one of those wires in the harness under the door operates the auger? 2 of my wires did not seem to have damage so if it is one of those then I will check them again.
Any other suggestions? Thanks.