ZISP480DKCSS GE Monogram ice/water dispenser issues

[Tracy11]

Model Number

ZISP480DKCSS

Brand

GE

Age

1-5 years

Just replaced the auger motor for our GE Monogram Refrigerator model number: ZISP480DKCSS. Works great.

Less than a week later, 2 new issues started:

1st - Ice chute flap not closing completely so I bought a new solenoid for it.

2nd - Before I had a chance to install the new solenoid, the ice/water dispenser started giving only crushed ice (even when pressing cube ice button) and this morning the control lock button came on and cannot be unlocked.

I tried unplugging it to reset. No joy.

Will replacing the solenoid fix the door lock and ice selection buttons or is there another part I need? Might as well get that part and install it the same time as the solenoid.

Thanks for your advice!

 

[Jake]

This problem could either be the dispenser board or main control board. I don't have the schematic for this model to confirm which it is.

But usually when the dispenser display locks up like that, its the dispenser display board that's the problem, but its expensive: Glass Touch Disp Asm Blk WR55X23461

So you may want to have a GE tech. come out to confirm it first.

Jake